Fast Joint 1 X Left 1x Right (Stopper-Stopper) Round Tube 7.5° (Ø 22 Mm And Ø 29 Mm)

TRL257:

These twojoints connect2 round tubes with each other so that they can be kinked at the connection point. Due to the fine toothing, you can bend the round tubes from the straight state in 7.5° steps and fix them with the hand screw. Up tomax.180°.In this state, the round tubes are next to each other.The legs on both sides are angled 45°. To understand: Article Tt223 has no angled legs.

The joint is attached to the round tube using a rivet pliers and two blind rivets. There are two holes on the joint to insert a blind rivet and fasten it with the rivet pliers. With a Ø (diameter) 22mmround tube, you insert the round tube into the hole in the accessory.

This set article contains a left and a right connection. If you want to build a bimini, you have the hand screws on the outside of the frame.

The joints can also be bought individually:

Joint: 1x left Item number: TL257
Joint : 1 x rightItem number: Tr257

This accessory is often used for bimini, equipment holders, support stands, bathing ladders, sunroofs or reelings for your boat.

When assembled the joint 68 mm long. It extends the pipe to a length of 68 mm.

you put the round tube in the hole of the accessory.

This set article contains a leftand a right connection.If you want to build a bimini, for example, you have the hand screws on the outside Scaffolding.

The joints can also be bought individually:

Joint: 1 x left Item number: TL257
Joint: 1 x right Item number: Tr257

These accessories are often used for bimini, equipment holders, support stands, bathing ladders, sunroofs or reelings for your boat.

When plugged together, the joint is 68 mm long. It extends the pipe to a length of 68 mm.

you put the round tube in the hole of the accessory.

This set article contains a leftand a right connection.If you want to build a bimini, for example, you have the hand screws on the outside Scaffolding.

The joints can also be bought individually:

Joint: 1 x left Item number: TL257
Joint: 1 x right Item number: Tr257

These accessories are often used for bimini, equipment holders, support stands, bathing ladders, sunroofs or reelings for your boat.

When plugged together, the joint is 68 mm long. It extends the pipe to a length of 68 mm.

and contain a right connection.If you want to build a bimini, for example, you have the hand screws on the outside of the frame.

The joints can also be bought individually:

Joint: 1x left Item number: TL257
Joint: 1 x rightItem number: Tr257

These accessories are often used for bimini, equipment holders, support stands, bathing ladders, sunroofs or reelings for your boat .

When assembled, the joint is 68 mm long. It extends the pipe to a length of 68 mm.

and contain a right connection.If you want to build a bimini, for example, you have the hand screws on the outside of the frame.

The joints can also be bought individually:

Joint: 1x left Item number: TL257
Joint: 1 x rightItem number: Tr257

These accessories are often used for bimini, equipment holders, support stands, bathing ladders, sunroofs or reelings for your boat .

When assembled, the joint is 68 mm long. It extends the pipe to a length of 68 mm.

Joint: 1x left Article number: TL257
Joint: 1 x rightArticle number: Tr257

These accessories are often used in bimini, device holders, support stands, bathing ladders, sunroofs or reelings for your boat used.

When assembled, the joint is 68 mm long. It extends the pipe to a length of 68 mm.

Joint: 1x left Article number: TL257
Joint: 1 x rightArticle number: Tr257

These accessories are often used in bimini, device holders, support stands, bathing ladders, sunroofs or reelings for your boat used.

When assembled, the joint is 68 mm long. It extends the pipe to a length of 68 mm.