Fasten Rod Extension (225 Mm) (Ø 25) Aluminum Connection Rotated By 90°

Et225:

The Et225 is an extension for all inclinable fasting items (where the item name says “inclinable”), such as: B. Rod, anchor and GoPro holders. The extension is switched in between by loosening the tilting joint and then screwing it back onto the extension. It consists of a tubular rod with a gradually adjustable angle for your accessories. This gives you the freedom to place your tilting fasting accessories the way you want them. The aluminum connection is rotated by 90° on one side, which makes sense with some accessories. In particular, this can be done at z. B. Action cameras or tablets are an advantage.

The installation of the extension is quick and easy. Here is an example, which will clearly explain to you how you should proceed:

Let’s assume you have a Ht213 rod holder from Fasten and want to extend it in height. Then you should use this extension together with the rod holder. The rod holder can be tilted and comes with a corresponding star-shaped plug for the Fs219 bracket.

1. To use the extension, you should unscrew the star-shaped plug from the rod holder.
2. Then screw this onto the lower end of the extension.
3. You screw the actual rod holder that is left over to the upper end of the extension.
4. Now you have yours Rod holder mounted on the extension. Now you can plug the extension into the Fs219 bracket on your boat. Note: You can determine the angle of inclination yourself. The washers supplied are used to fine-tune the angle of inclination in stages. As soon as you have determined the angle, all you have to do is tighten the screw with the plastic handle by hand so that the position of the rod holder is fixed.

The assembly is identical for all other tiltable Fasten accessories .

Since the Et225 extension consists of a metal tube with a Ø (diameter)25 mm, you can attach an additional FMr125 or FMr225 base with bracket (s) to the tube. The extension is 205 mm long.

Product features: