Fasten Rod Extension (632 Mm) (Ø 25) Made Of Aluminum

Ex632:

The Ex632 is an extension for all inclinable fasting articles (where the article name says “inclinable”), such as: B. Rod, anchor and GoPro holders. The extension is switched between by loosening the tilting joint and then screwing it back onto the extension.It consists of atubular rod with a gradually adjustable angle for your accessories. This gives you the freedom to position your tiltable fasting accessories the way you want them.

The extension can be installed quickly and easily. Here is an example that will clearly explain how you should proceed:

Let’s assume you have an HT213 rod holder from Fasten and want to extend it in height. Then you should use this extension together with the rod holder. The rod holder can be tilted and comes with a corresponding star-shaped plug for the Fs219 bracket.

1. To use the extension, you should unscrew the star-shaped plug from the rod holder.
2. Then screw this onto the lower end of the extension.
3. You screw the actual rod holder that is left over to the upper end of the extension.
4. Now you have yours Rod holder mounted on the extension. Now you can plug the extension into the Fs219 bracket on your boat. Note: You can determine the angle of inclination yourself. The washers supplied are used to fine-tune the angle of inclination in stages. As soon as you have determined the angle, all you have to do is tighten the screw with the plastic handle by hand so that the position of the rod holder is fixed. You can screw the two parts of the extension together in the same way, taking into account the angle of inclination.

The assembly is identical for all other inclinable Fasten accessories.

Since the Ex632 extension consists of a metal tube with a Ø (diameter) of 25 mm, you can attach several FMr125 or FMr225 bases with brackets to the tube. The extension is 610 mm long.

Product features:

• Extension for all tiltable accessories from Fasten, such as rod, anchor or GoPro holders
• Length: 610 mm