Fasten Transducer Rod For Stern Or Bow Mounting Transducer For Echo Sounder (300mm)
The Ft300 is a transducer rod for the echo sounder on the boat.So that the echo sounder receives a signal, there is an echo sounder transducer, which is attached to the echo sounder via a cable Must be kept underwater. These accessories do just that. Every common echo sounder transducer fits on this bracket. The maximum possible thickness of an echo sounder transducer is 40 mm.
Since the transducer has a fixed orientation and cannot be rotated, this transducer rod is only for the front or Rearmounting on the boatsuitable.For exampleon a dinghy, this is the reartransom. The flattened tips of a belly boat (only possible with some models such as Zeck or Jenzi). The Ftr300 or Ft400 is suitable for side mounting. The star cannot be rotated.
Attached to the transom, you have to bend down to get the echo sounder transducer out of the water.
The length of the echo sounder transducer in the assembled state is 330 mm, (measured in the 90° bent state).
- Echo sounder mount for your boat
- particularly suitable for the transom on the inflatable boat
- Length: 300 mm
|Country of manufacture||Ukraine|
|Net weight||250 g|
|Length x width x height||396 × 64 × 39 mm|