Fasting 1 X Rods And Tube Joint (Collar Plug) For (Ø 32 Mm) E.G. For Bimini

Tf032:

This fasting accessory holds a tube with a Ø (diameter) of 32 mm. One side has a collar with which the pipe is held and the other side has a plug that is attached to the cut end of the aluminum pipe. Plug dimensions outside 27 mm inside 20 mm.

After the plug has been sunk into the pipe, it should be fixed with two blind rivets.

The joint is attached to the round tube with the help of rivet pliers and two blind rivets. There are two holes on the joint to insert a blind rivet and fasten it with the rivet pliers. If you want to remove the rivet again, it has to be drilled through.

It is used in the construction of tubular frames, as is the case with abimini or a fabric roof constructionFasten himself uses this joint in his support stand equipment carrier such as St080.

It can be tilted 180° to the side and fixed with the hand screw. Thecollar end can be rotated 360° and cannot be fixed (so that it stops rotating).

The same article is also available for other Ø (diameter):

• Ø (diameter)22 mm: 1 piece