Fasting 2 X Rods & Tube Joint (Collar Plug) For (Ø 22 Mm) E.G. For Bimini
This fasting accessory holds a tube with a Ø (diameter) of 32 mm. One side has a collar, with which the tube is heldand the other side has aplug that is attached to the cut end of the aluminum tube.After the plug has been sunk into the tube, it should be fixed with a pin . The plug already has a hole for this purpose.It is used in the construction of tubular frames, as is the case with abimini or a fabric roof constructionFasten himself uses this joint in his support stand, equipment carrier such as. St080. It can be180° tilted to the side.
The joint is attached to the round tube using a rivet gun and two blind rivets. There are two holes on the joint to insert a blind rivet and fasten it with the rivet pliers. If you want to remove the rivet again, it has to be drilled through.
The same article is also available for other Ø (diameter):
- Ø (diameter) 32 mm: 1 piecesingle pack: Tf032
- Ø (diameter) 32 mm: 2piecesdouble pack:Tf032-2
Height: when plugged in55 mm
|Country of manufacture
|Length x width x height
|82 × 53 × 35 mm
White, Black, Gray