Fasting Bracket [PVC Base] (110 Mm X 110 Mm), PVC Inflatables Assembly: Gluing
The FMp224 is a bracket with an adhesive surface of 110 mm x 110 mm, especially for PVC inflatable boats. The bracket must be glued to the boat skin of inflatable boats.
Due to the PVC base, this bracket is perfect for installation on PVC inflatable boats. Gluing with the Bengar PVC adhesive kit (item number: MK-04) provides the best hold. Alternatively, they can also be attached with the self-adhesive double-sided adhesive VHB from 3M. The double adhesive adheres particularly well to smooth surfaces such as wood, metal or plastic. On the boat skin of inflatable boats, if it is assembled and dismantled too often, it could come loose. The advantage of the double adhesive is that it can be removed without leaving any traces.
If you have a Hypalon inflatable boat and are looking for a suitable bracket for it, the bracket with the item number: FMp226 is perfect for it. For Nitroion inflatables, you should use the bracket with the item number:FMp227.
ATTENTION: The Bengar PVC adhesive cannot be used with these types of inflatable boats!
- smaller adhesive surface for smaller spaces
- Bracket for PVC inflatable boats
- Dimensions: 110 mm x 110 mm
- must be attached to the Can be glued
- the Fs219 bracket to the corresponding base
- full compatibility with the entire range of accessories from Fasten
|Country of manufacture||Ukraine|
|Net weight||195 g|
|Length x width x height||110 × 110 × 43 mm|
There are no reviews yet.