Set: Fast Anchor Bracket + Bracket [C-Shaped Base] Horizontal Kayak Tilt.

Set includes: 1xAl003+ 1xFFr222.

Al003:

Compared to the Al002, this anchor holder is tiltable. To do this, loosen the screwby hand,tilt it to the desired angle andfixit by turning the screw again.

This is a new type of anchor holder that has the advantage of no knots to tie.

Due to thelocking mechanism, you can only pull the rope in onedirection. Readjustment is also very easy and you stand with your boat exactly where the anchor was thrown. So you can fish in all directions without the fear of getting caught on the anchor rope with your bait. can be unlocked again with a flick of the wrist

removable max.load capacity 8 kg

FFr222:

Often, kayak and aluminum boats have built-in profiles. Either in the interior (suitable bracket: FMa) or on top of the board (suitable bracket: FFr222). Well-known profile names are “C-Like Profile” or “FeelFree”.These profiles are of different sizes. The scope of delivery therefore also includes 2 different thickeners. This means that the 2 metal plates can be adjusted to 3 different sizes:

-1 size 22 x 12 x 1 mm * (without the use of the thickener for “C-Like profiles”)
-2 size 30 x 15 x 4 mm * (with the use of the small thickener for”C-Like profile”)
-3 size 33 x 18 x 4 mm * (with the use of the large thickener for”FeelFree “)
* Length, Width, Thickness

The FFr222 bracketcan be clamped onto a C-shaped or FeelFree profile – without any drilling whatsoever. You don’t need any tools to fix the bracket or change its position. Small to medium loads are therefore not a problem for the mounting system. However, you should avoid higher loads.

This mounting system is extremely practical for use on kayaks where the C-profile is on the board of the kayakis.

Thebracket contains 2Knobs for adjusting the position of the base along the profile. The mounting system is made of high-strength polyamide plastic. Not every kayak has such a C-shaped or FeelFree profile installed at the factory, so check before buying whether your kayak has something like this and whether the dimensions of the metal plates fit.

The Bracket is compatible with all Fasten accessories. It is important that you lubricate the fastening ring with silicone grease.The supplied silicone is intended for the lubrication of the moving parts and the sealing ring and prevents the formation of a water film that could freeze, which does not affect the functionality of the brackets even at low temperatures .

Product features: