Set: Fasten Anchor Attachment + Bracket [PVC Base] (110 Mm X 110 Mm), PVC Inflatable Boat
Set includes: 1xAl002+ 1xFMp224.
This is a new type of anchor holder that has the advantage of not having to tie a knot.
Due to the locking mechanism, the rope can only be pulled in one direction. Readjustment is also very easy and you stand with your boat exactly where the anchor was thrown. So you can fish in all directions without the fear of getting caught on the anchor rope with your bait. The bracket can also be used for other holding tasks, such as holding a fenderon a boat.
To loosen the anchor again (e.g. if you want to lower the anchor again),
The FMp224 is a bracket with an adhesive surface of 110 mm x 110 mm, especially for PVC inflatable boats. The bracket must be glued to the boat skin of inflatable boats.
Due to the PVC base, this bracket is perfect for installation on PVC inflatable boats. Gluing with the Bengar PVC adhesive kit (item number: MK-04) provides the best hold. Alternatively, they can also be attached with the self-adhesive double-sided adhesive VHB from 3M. The double adhesive adheres particularly well to smooth surfaces such as wood, metal or plastic. On the boat skin of inflatable boats, if it is assembled and dismantled too often, it could come loose. The advantage of the double adhesive is that it can be removed without leaving any traces.
If you have a Hypalon inflatable boat and are looking for a suitable bracket for it, the bracket with the item number: FMp226 is perfect for it. For Nitroion inflatable boats, you should use the bracket with the item number: FMp227. ATTENTION: The Bengar PVC adhesive cannot be used with these types of inflatable boat!
- smaller adhesive surface for narrow spaces
- Bracket for PVC inflatable boats
- Dimensions: 110 mm x 110 mm
- must be glued to the boat skin
- contains the FS219 bracket for the corresponding base
- full compatibility with the entire range of Fasten accessories
|Country of manufacture
|Length x width x height
|110 × 110 × 108 mm