Set: Fasting Bracket [PVC Base] (110 Mm X 110 Mm) + VHB 3M Pad Assembly: Double Adhesive Black
Set includes: 1x FMp224 + 1xVHB-3M-Pad.
The FMp224 is a bracket with an adhesive surface of 110 mm x 110 mm, especially for PVC inflatable boats. The bracket must be glued to the boat skin of inflatable boats.
Due to the PVC base, this bracket is perfect for installation on PVC inflatable boats. Gluing with the Bengar PVC adhesive kit (item number: MK-04) provides the best hold. Alternatively, they can also be attached with the self-adhesive double-sided adhesive VHB from 3M. The double adhesive adheres particularly well to smooth surfaces such as wood, metal or plastic. On the boat skin of inflatable boats, if it is assembled and dismantled too often, it could come loose. The advantage of double glue is that it can be removed without leaving any traces.
If you have a Hypalon inflatable boat and are looking for a suitable holder for it, the holder with the item number: FMp226 is perfect for it. For Nitroion inflatable boats you should use the bracket with the item number: FMp227.
ATTENTION: The Bengar PVC adhesive cannot be used with these types of inflatable boats!
- smaller adhesive surface for smaller spaces
- Bracket for PVC inflatable boats
- Dimensions: 110 mm x 110 mm
- must be attached to the Can be glued
- the Fs219 bracket to the corresponding base
- full compatibility with the entire range of accessories from Fasten
- Easy-to-use locking mechanism when changing accessories such as rod, smartphone or cup holders to the holder
- Accessories can be easily exchanged
- Protective cap so that no water or dirt gets in the bracket is coming
If you are looking for a bracket with a larger adhesive surface, take a look at the article with the article number: FMp225!
TheVHB 3M adhesive surface allows you to attach a FMp224 orFMp225 bracket without glue. To do this, remove the protective paper from the double-sidedadhesive pad and attach the bracket tothe desiredplace on the boat. It is suitable not for inflatable boats such as inflatable boatsor belly boats.For this we recommend gluing with the Bengar adhesive kit item number: MK-04. It sticks wonderfully on smooth surfaces such as plastic, aluminum or wood. The bracket can be removed from the boat without a trace. The adhesive strength is amazingly good.
The bracket can be removed from the boat without a trace. The adhesive strength is amazingly good. The bracket can be removed from the boat without a trace. The adhesive strength is amazingly good.
|Country of manufacture||Ukraine|
|Net weight||222 g|
|Length x width x height||110 × 110 × 44 mm|
There are no reviews yet.