Set: Fasting Bracket [PVC Base] (140 Mm X 140 Mm) + VHB 3M Pad Assembly: Double Adhesive

Set includes: 1xFMp225+ 1xVHB-3M-Pad.

FMs225:

With the FMs225 you can now attach your bracket or bracket base completely without glue Assemble your boat. The double-sided adhesive surface of the FMs225 is ideally suited for smooth surfaces such as plastic,metal, wood, etc.It is not for inflatable boats such as inflatable boatsor belly boats.For this we recommend gluing with the Bengar adhesive kit item number: MK-04

Product features:

• double-sided adhesive surface for attaching toplastic,metal,wood.
• ideally suited for metal, wood, aluminum, plastic, etc.
• very easy assembly: peel off and stick on
• can be removed again without a trace

FMp225:

The FMp225 is a bracket with an adhesive surface of 140 mm x 140 mm for higher loads, especially for PVC inflatable boats. The bracket must be glued to the boat skin of inflatable boats.

Due to the PVC base, this bracket is perfect for installation on PVC inflatable boats. Gluing with the Bengar PVC adhesive kit (item number: MK-04) provides the best hold. Alternatively, they can also be attached with the self-adhesive double-sided adhesive VHB from 3M. The double adhesive adheres particularly well to smooth surfaces such as wood, Metal or plastic. On the boat skin of inflatable boats, if it is assembled and dismantled too often, it could come loose. The advantage of the double adhesive is that it can be removed without leaving any traces.

If you have a Hypalon inflatable boat and are looking for a suitable holder, the holder with the item number: FMp226 is perfect for it. For nitrilon inflatable boats, you should use the bracket with the item number: FMp227.

ATTENTION: The Bengar PVC adhesive cannot be used with these types of inflatable boats!

Product features:

• Large adhesive surface for a particularly strong hold
• Bracket for PVC inflatable boats
• Dimensions: 140 mm x 140 mm
• to attach without glue. To do this, remove the protective paper from the double-sidedadhesive pad and attach the bracket tothe desiredplace on the boat. It is not for inflatable boats such as inflatablesor belly boats.For this we recommend gluing with the Bengar adhesive kit item number: MK-04. It sticks wonderfully on smooth surfaces such as plastic, aluminum or wood. The bracket can be removed from the boat without a trace. The adhesive strength is amazingly good.

  Stand at the boat. It is not for inflatable boats such as inflatablesor belly boats.For this we recommend gluing with the Bengar adhesive kit item number: MK-04. It sticks wonderfully on smooth surfaces such as plastic, aluminum or wood. The bracket can be removed from the boat without a trace. The adhesive strength is amazingly good.

  Stand at the boat. It is not for inflatable boats such as inflatablesor belly boats.For this we recommend gluing with the Bengar adhesive kit item number: MK-04. It sticks wonderfully on smooth surfaces such as plastic, aluminum or wood. The bracket can be removed from the boat without a trace. The adhesive strength is amazingly good.